Lmp1 Style Custom Wheel

Volante

A WORD OF CAUTION

QUOTE:

“The document states that “optical radiation detected by the retina impacts an individual’s behavior, psychology, and perception of the environment.”

What is being talked here is that the LED light on the eye retina is bad for health! The LEDs on this wheel are so intense, as they are configured, that sickness can be felt after the first minute. 

Keep this in mind when using yours too bright.


On The wheel

vlcsnap-error106

The rim is a Sparco P104 replica,

 

IMG_20170107_212834

the box on top of the wheel is a rectangular plastic (ABS) one,

 

vlcsnap-error051

 

the board that holds the little multicolored buttons the display and the leds its a generic board that holds a Tm1638 chip.

 

vlcsnap-error370

 

the Leds on the 1638 board are 5mm, 3.2V, Pink. It´s an arduino Nano to connect all this apparatus.

 

vlcsnap-error066

There´s a singular push button on the wheel and  it´s a NKK MB2011 with a GB13B guard.


The board inside the BOX

IMG_20161221_145638

IMG_20161221_145458

IMG_20161220_163312

I desoldered the default leds and buttons. It was then used the 5mm pink leds and longer push buttons. With longer push buttons i could fit the colored caps (photo above).

vlcsnap-error352

You can connect this board to the arduino nano in the same manner as in the project of DiY Shift Light and Display for Sim Racing

As in here, below

TM1638 DONE

I use this wheel on one of my G27´s and it works fine. Can´t show a picture because i have none.

You can make different arrangements with the DX SLI Manager software regarding the displays and Leds configuration.

Converging shift lights is an example

vlcsnap-error560

 

On closing…

This was a  quick made project. It came as a solution for a display on the wheel and it turned out just fine, with room for the full degree of rotation of the wheel, 900º.

As this was a project that was almost all built in my garage, extreme attention to tolerances in measurements on the cutting of the box was not taken into account.

A reminder is that it can be used in other wheels because the software runs independent of the wheel.

More information can be found on my video.

Custom Wheel

 

See you soon on the next project.


Bibliographical References for LEDs Studies.

 

http://www.ledsmagazine.com/articles/2010/11/light-and-human-health-led-risks-highlighted.html

http://ieeexplore.ieee.org/abstract/document/5618050/